GT-1468 Series Manual Pluse Generator With Emergency Stop Button For CNC Lathe And Printing Mechanism, To Accomplish Zero Collaboration Or Signal Segmentation
GT-1468 Series Manual Pluse Generator For CNC Lathe And Printing Mechanism, To Accomplish Zero Collaboration Or Signal Segmentation
A manual pulse generator (MPG) is a device for generating electrical pulses (short bursts of low current) in electronic systems under the control of a human operator (manually), as opposed to the pulses automatically generated by software. MPGs are used on computer numerically controlled (CNC) machine tools, on some microscopes, and on other devices that use precise component positioning. A typical MPG consists of a rotating knob that generates pulses that are sent to an equipment controller. The controller will then move the piece of equipment a predetermined distance for each pulse.
Manual pulse generators institute a command pulse when the handle is turned. Manual pulse generators are typically rotating knobs that generate electrical pulses. They are normally associated with computer numerically controlled (CNC) machinery or other devices involving positioning. When the pulse generator sends an electrical pulse to an equipment controller, the controller then moves a piece of equipment a predetermined distance with every pulse.
Manual pulse generators may use one of three different encoder technologies.
Magnetic encoders consist of a plastic drum that turns against a magnetic sensor. The drum is lined with magnetic poles used to generate an electrical signal indicating the drum’s position.
Optical encoders use a light source and a photo detector array to read the optical pattern of a plastic or glass disc and translate the pattern into a position data code.
Mechanical rotary encoders consist of a metal disc with a ring of cut-out openings as well as a row of sliding contacts fixed to a stationary object. The metal disc is attached to a rotating shaft, and each stationary contact is connected to an electrical sensor. As the disc rotates, some of the contacts touch the disc and switch on, while others fall in the gaps where the metal has been cut out. The combination of switched-on and switched-off contacts creates a unique binary code for each disc position.
GT-1468 manual pulse gererator Enable button and E-stop button,with options of 25ppr and 100ppr, can work with GSK SYNTEC KND SIMENS MITSUBISH FANUC System.
Features:1.Gertech Hand Wheel is widely applied in CNC Lathe and Printing Mechanism, to accomplish
zero Collaboration or Signal Segmentation.
2.High reliability, long life and strong anti-interference ability,wide temperature range for operating.
3.Metal gear brings, reliable and clear feeling when rotating;
4.Plastic Cover, Oil-proof Seal Design;
GSK SYNTEC KND SIMENS MITSUBISH FANUC System
134 x 68mm
|Supply Voltage||5v, 12v, 24v(+-10%)|
|Output form||Line Driver, Voltage Output|
|Max Current Consumption||80mA(Line) 120mA(V)|
|Max. Response Frequency||10khz|
|Rise/fall Time||200ns(Line Driver),1μs(Voltage)|
|Degree of Protection||IP50|
|Options of Axles||X,Y, Z,4|
|Magnification Levels||X1, X10, X100|
The rotary encoder is packed in standard export packaging or as required by buyers;
1) How to select an encoder?
Before ordering encoders, you could clearly know which type of encoder you may need.
There are incremental encoder and absolute encoder, after this, our sale-service department would better work for you.
2) What specifications are requested before order an encoder?
Encoder type—————-solid shaft or hollow shaft encoder
External Diameter———-Min 25mm, MAX 100mm
Shaft Diameter—————Min shaft 4mm, Max shaft 45mm
Phase & Resolution———Min 20ppr, MAX 65536ppr
Circuit Output Mode——-you could choose NPN,PNP,Voltage, Push-pull,Line driver, etc
Power Supply Voltage——DC5V-30V
3) How to choose a right encoder by yourself ?
Exact Specification Description
Check The Installation Dimensions
Contact Supplier to get more details
4) How many pieces to start ?
The MOQ is 20pcs .Less quantity is also ok but the freight is higher.
5) Why choose “Gertech” Brand Encoder?
All encoders are designed and developed by our own engineer team since year 2004,and most of the electronic component of encoders are imported from overseas market. We own the Anti-static and no-dust workshopand our products pass the ISO9001. Never let our quality down,because quality is our culture.
6) How long is your lead time?
Short lead time—-3 days for samples,7-10days for mass production
7) what is your guarantee policy?
1year warranty and life-long technical support
8)What are the benefit if we become your agency ?
Special prices, Market protection and supporting.
9)What is the process to become Gertech agency?
Please send us enquiry,we will contact you as soon as possible.
10)What is your production capacity?
We produce 5000pcs every week.Now we are building second phrase production line.